|
Quick Set Ratcheting Insert F-Clamp for Efficient and Powerful Clamping Force
| MOQ: | 20 |
| Price: | 1-50 USD |
| Standard Packaging: | 290×85×65mm |
| Delivery Period: | 15-25 work days |
| Payment Method: | L/C,D/A,D/P,T/T,Western Union |
| Supply Capacity: | 500 units/month |
quick f clamp
,quick fixture clamp
,8000n f clamp
Quick Set Ratcheting Insert F-Clamp for Efficient and Powerful Clamping Force
The Quick Set Ratcheting Insert F-Clamp for Efficient and Powerful Clamping Force is an industrial-grade, high-end fastening clamp. It's an upgraded version of the conventional ratcheting F-clamp with an embedded structure, incorporating three key design features: quick positioning, ratcheting locking, and an embedded clamping jaw. Its main advantages are one-second quick positioning, powerful clamping force, and a seamless, gap-free fit of the clamping jaws. It offers over 40% greater clamping stability compared to ordinary ratcheting F-clamps.
| Maximum clamping width | 12 inches / 305 mm |
|---|---|
| Clamping depth | 4 inches / 102mm, embedded clamp depth ≥ 15mm |
| Main shaft specifications | 14×14mm solid carbon steel square bar, wall thickness ≥2.5mm |
| Rated clamping force | ≥8000N |
| Net weight / Gross weight | 1.8-2.0 kg/piece / 2.0-2.2 kg/piece |
- Dual-Position Quick-Release Locking Structure: The main rod features a pre-set precise locking position + a fine-tuning sliding position dual-positioning design. The precise locking position allows for rough positioning of large workpieces in 1 second, while the fine-tuning sliding position meets the ±5mm precision clamping requirements. Ordinary models on the market only have a single positioning mechanism, unable to balance both efficiency and precision;
- Embedded Hardened Clamping Jaws: The embedded clamping surface is subjected to overall high-frequency hardening to HRC50-55, increasing the hardness of the clamping jaws by 20% compared to ordinary embedded clamps. It prevents dents and wear during long-term clamping of thick steel plates/hardwood materials, ensuring long-lasting and stable clamping accuracy;
- Ductile Iron Integrated Base: Uses an HT200 ductile iron integrated casting base, instead of ordinary stamped steel plates, improving deformation resistance and anti-slip capabilities by 60%. There is no base warping under 8000N full-load clamping, meeting the precision operation requirements of high-end welding tables;
- Dual Unlock Buttons with Anti-Accidental Touch Design: The handle integrates quick-release and ratchet unlock independent dual buttons, both with recessed spring-loaded designs. This prevents accidental unlocking due to hand contact or workpiece collision during operation, and allows for easy operation even with industrial gloves. Ordinary models on the market often have combined buttons, which are prone to accidental touches;
- Composite Material Embedded Clamping Jaw Pads: The clamping jaw pads use a double-layer composite material of nylon + rubber. The outer rubber layer increases friction to prevent slipping, and the inner nylon layer improves wear resistance. The service life is 3 times longer than ordinary rubber pads, and the embedded snap-on design eliminates the risk of detachment.
1. Raw Material Incoming Inspection
Ductile Iron / 45# Carbon Steel: Material grade, hardness, and composition are tested to ensure compliance with HT200/45# steel standards. Non-conforming raw materials are returned immediately.
Composite Jaw Pads / PP+TPR Grips: Environmental friendliness (RoHS/REACH), wear resistance, and temperature resistance are tested to ensure no hardening or cracking between -30℃ and 150℃.
Ratchet Gears / Quick-Release Buckles: Tooth profile accuracy and hardness are tested to ensure HRC45-50 after quenching, with a tooth profile error of ≤0.01mm.
2. In-Process Inspection
Each process step has a dedicated high-level quality control inspector. Key inspections include the fit of the embedded jaws, the accuracy of the main shaft positioning, and the smoothness of the ratchet mechanism. The fitting gap is ≤0.05mm, and the positioning error is ≤0.1mm.
During assembly, the sensitivity of the dual-release buttons and the clamping force are tested. The peak clamping force is randomly checked on every 5 units to ensure it reaches 10000N, far exceeding the rated 8000N standard.
3. Final Product Inspection
Every finished product is inspected: quick-release positioning smoothness, ratchet locking force, dual-release sensitivity, embedded jaw fit, and absence of scratches/paint defects on the surface. Any non-conformance results in rework.
The full inspection includes clamping accuracy testing, ensuring that the workpiece displacement after clamping is ≤0.1mm, meeting the requirements for precision machining.
- We maintain a regular stock of high-end specifications, ensuring precise delivery within 48 hours for orders under 300 units. Bulk orders are delivered on time according to the agreed schedule after confirming requirements, with compensation of 5‰ of the order value per day for any delays.
- Customized orders (LOGO/specifications/color/packaging) are delivered within 7-12 days after design confirmation. We provide real-time updates on production progress throughout the process, with dedicated customer service representatives providing one-on-one support and keeping clients fully informed.
- All raw materials and Quick Set Ratcheting Insert F-Clamps for Efficient and Powerful Clamping Force comply with full CE/CSA/DIN 5119/RoHS/REACH certification standards. Materials are free of harmful substances, and the manufacturing process and specifications are highly consistent. We offer a ten-fold compensation for any counter-feit products, ensuring compliance and suitability for the global high-end market.
